8mm 2 pin LED Light Strip Connectors

Home/Home Improvement/8mm 2 pin LED Light Strip Connectors

8mm 2 pin LED Light Strip Connectors

limited time only
Start Date: Jul 09, 2020 at 12:01 AM PDT | End Date: Jul 18, 2020 at 11:59 PM PDT
SKU: BL20B-8-1 Category:

Description

  • DIY Strip to Wire Quick Connection Updated version of LED light strip connectors, assemble wire by yourself as needed, flexible to different project! No need to solder. Just clasp your prepared led strip section into the connector to get connected. compatible with 30-120 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.
  • Suitable for a variety of wire sizes Stripping-free connectors usually have strict requirements on the wires, such as the standard wire 20 awg, 18 gauge can be well matched, and it is difficult to open again after closing. These BL LED strip connector improves these shortcomings, 24 – 18awg standard or non-standard solid wire, stranded wire and fused wire can be applied. not only can be firmly clamped, but also easy to open and reuse.

How to choose the appropriate LED light connectors

1. Determine the light strip type

  • Color, width, and waterproof rating of strips are the key points to choosing a appropriate connector. It doesn’t have much to do with whether the chips of your light strip is 3528 or 5050.
How to choose a 2 pin 8mm led connector for a single color led light strip?
Led Light Strip Connectors 8mm 2 pin - DIY Strip to Wire Connectors

DIY Strip to wire connetor

24awg,22awg,20awg, 18awg standard or non-standard solid wire, stranded wire and fused wire can be applied. not only can be firmly clamped, but also easy to open and reuse

Led Light Strip Connectors 8mm 2 pin - DIY Strip to Wire Connectors

Solid Strip to wire connector

Have strict requirements on the wires, such as the standard wire 20 awg can be well matched, and it is difficult to open again after closing.

Led Light Strip Connectors 8mm 2 pin - DIY Strip to Wire Connectors

Ordinary connector with pigtail

Fixed wire length, less load current.

How to use the strip to wire connectors

Led Light Strip Connectors 8mm 2 pin - DIY Strip to Wire Connectors

1. Open the wire clip.

Led Light Strip Connectors 8mm 2 pin - DIY Strip to Wire Connectors

2. Use a fingernail to press the two wires into the slot.

Led Light Strip Connectors 8mm 2 pin - DIY Strip to Wire Connectors

3. Insert your 8mm LED light strip inside the clip underneath the two contact prongs, making sure the + and – symbols align.

Led Light Strip Connectors 8mm 2 pin - DIY Strip to Wire Connectors

4. Snap the wire clip shut. Pull on the wire to confirm you’ve secured the wires inside the connector.

Reviews

There are no reviews yet.

Be the first to review “8mm 2 pin LED Light Strip Connectors”

Your email address will not be published.

Go to Top