- 10mm 4 pin connectors suitable for SMD 5050 2835 3014 5630 single color LED light strips. One end connect 4-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 4pin 10 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 4 conductor wire, solid wire or stranded wire, Use these 4-pin connector with the 4 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
- Allow user to attach wire according project requirement.(Wire Color, Cross Section, length,etc)
- No need stripping wire insulation when splicing flat ribbon cable
- No need remove surface coating layer of waterproof strip light
- Good for high density light LED strip,clear cover won’t mask light of first LED.
- Gripping LED strip very reliably
Strip end operation
Wire end operation (if have)
Note: Above demonstration is about non-waterproof version, waterproof version is so similar.
Include Common LED Strip and Dream Color Digital LED Strip
–Common RGB LED Strip Light–
- LED Types: SMD5050, SMD3528
- LED Quantity Supported: 30~90 LEDs/Meter
–Pixel LED Strip–
Pixel IC Types: WS2813
LED Quantity Per Meter: <=72 LEDs/M
All LED strips listed above have 4 Soldering Pads on 10mm wide FPCB
Hippo-M Solderless Tape Light Connector for RGB
|Strip light protection||IP65||IP65|
|Types||strip to wire||strip to strip joint|
|Workable Wire Gauge||22 ~20 AWG||/|
|Workable Wire Cross Sectional Area||0.34~0.5 mm²||/|
|Workable Wire OD||Max 2.1 mm||/|
|Pin Pitch||2.5 mm|
|FPC Thickness Range||>0.2mm|
|Way of Contact||insulation-piercing contact|
|Pin Material||Phosphor Copper (Cu)|
|Housing Color (cap/base)||Transparent / Black|
|Flame Retardant Level||UL94v-0|
Remark: The data above are tested under 25℃.
If you have no idea, click >>