10mm 3pin led strip connector for dual color / dimmable CCT waterproof led strip lights

/, led light strip connectors/10mm 3pin led strip connector for dual color / dimmable CCT waterproof led strip lights

10mm 3pin led strip connector for dual color / dimmable CCT waterproof led strip lights

  • 10mm 2 pin connectors suitable for SMD 5050 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
  • The 5050 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
  • DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
  • The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.

Description

10mm 3pin led strip connector are designed for 10 mm widedual color / dimmable CCT strip light connection, such as SMD5050, SMD5630, SMD2835, SMD5730 and SMD3535, etc. The workable LED density is from 30LEDs to 120LEDs per meter for both waterproof and non-waterproof tape light. IDC technology make it possible to connect strip light with red / blue VHB foam tape on the back. Coming out as terminal without wire, users can DIY not just board to wire as lead connection purples but also board to board jumper with wire in middle. Both non-waterproof IP20 and waterproof IP65 are available including strip-to-wire and strip-to-strip-joint version.

Features
  • Allow user to attach 3 conductor wire according project requirement.(Wire Color, Cross Section, length,etc)
  • Support big current that is up to 5A
  • Good for high density light LED strip,don’t mask light of first LED.
  • Gripping LED strip very reliably
How to use 10mm 3pin led strip connector

Strip end operation

hippo-m SEN10-3--1 Cut LED Strip along the cuttable mark
1-1: Cut LED Strip along the cuttable mark
hippo-m SEN10-3--2 Remove protective paper of adhesive tape
1-2: Remove protective paper of adhesive tape
hippo-m SEN10-3--3 Insert LED strip to strip holder and press cap down
1-3: Insert LED strip to strip holder and press cap down
hippo-m SEN10-3--4 Finish connection to LED Strip
1-4: Finish connection to LED Strip

Wire end operation (if have)

hippo-m SEN10-3--5 Insert wire to wire holder of connector
2-1: Insert wire to wire holder of connector
hippo-m SEN10-3--6 Down close cap of connector
2-2: Down close cap of connector
hippo-m SEN10-3--7 Ensure cap is locked by base of connector
2-3: Ensure cap is locked by base of connector
hippo-m SEN10-3--8 Connection completed
2-4: Connection completed

Note: above operation is about non-waterproof version, waterproof types are similar

Workable LED Strips

Include Common LED Strip and Pixel LED Strip

–Common Dual Color / CCT LED Strip–

  • LED Types: SMD5050, SMD5630, SMD5730, SMD335, SMD3535
  • LED Quantity Supported: 30~90 LEDs/Meter

–Pixel LED Strip–

Pixel IC Types: WS2811/ WS2812/ WS2812B/ WS2813/ SK6812

LED Quantity Per Meter: <=72 LEDs/M

All LED strips listed above have 3 Soldering Pads on 10mm wide FPCB

Technical Data
Item Name
Hippo-M 3 Pin Dimmable LED Strip Light Connector for Dual Color / CCT 10mm
Item NO.DJ-N10XB-3DJ-N10BB-3
Strip ProtectionIP65IP65
TypeStrip to wireStrip to strip joint
Workable Wire Gauge22 ~20 AWG/
Workable Wire Cross Sectional Area0.34~0.5 mm²/
Workable Wire ODMax 2.1 mm/
Polarity QTY3
Pin Pitch2.9mm
Way of Contactinsulation-piercing contact
Working VoltageDC3V~24V
Rated Current5A
Housing Color (cap/base)Transparent / Black
Min.LED Strip Thickness>0.2mm
Housing MaterialPC
Pin MaterialPhosphor Copper (Cu)
Flame Retardant LevelUL94v-0

Remark: The data above are tested under 25℃.

If you have no idea, click >>How to choose a 2 pin connector for a single color led strip lights?

Reviews

There are no reviews yet.

Be the first to review “10mm 3pin led strip connector for dual color / dimmable CCT waterproof led strip lights”

Your email address will not be published. Required fields are marked *

You may also like…